I have learned that you can do Volume-Down plus Power simultaneous button press to capture the screen as a part of the Jellybean feature.
I tried this many times and it did not work. Only thing I saw coming up was the volume control.
Resolution:
The buttons work as advertised. I was not doing this right (as with a several other people posted this complaint). I was thinking that by pressing these buttons the screen shot starts right away. And that's where I was wrong.
The real trick is this.
- Press the power and volume down button simultaneously and hold both buttons pressed for 1-2 seconds (and be patient) until the screen capture completes.
- Note that if the volume thing comes up on the screen you messed up the timing of simultaneous pressing. Release both fingers and try again.
- You could also be inadvertently pressing both Volume Up and Down simultaneously as you do this. Try holding the volume button really towards one edge. (Never use your thumb ;-)
- Do you have a teenager handy? Ask him or her try it. If it works with them, then, well, the machine is fine.
Good luck!
2 comments:
Brilliant thanks this is the only post anywhere of any use. No one else said hold!
It's too intuitive to everyone.
Post a Comment